1 Note for testing institutes
34
1
Note for testing institutes
1.1
Test standard
EN 60436:2020, EU 2019/2017
1.2
General note on low power modes
When the eco programme finishes the appliance enters the OFF mode. It takes around 30 seconds to shut down and enter the OFF
mode. The energy consumed during these 30 seconds is attributable to the energy consumption of the eco programme (E
t
).
The power consumption of the networked standby mode is determined with V-ZUG-Home enabled. Mobile devices must not be con-
nected to the V-ZUG appliance via the V-ZUG App.
1.3
AdoraDish V6000 models (AS6T...)
The appliances are equipped with a water tank. For hygiene reasons, the tank is automatically emptied 36 hours after being filled.
The tank is filled only on the third programme if twice in a row the waiting time between programmes is less than 36 hours (or 50
hours in the case of the eco programme). To ensure the tank is full, the following must be carried out before conducting the test:
Conditioning the test appliance
Before starting the test, run three programmes for normally to heavily soiled dishes. To ensure the water tank is full, the last pro-
gramme to be run must be the eco programme and the appliance must be disconnected from the mains (the appliance can remain
connected to the mains if no more than 36 hours have elapsed between the conditioning and the start of the first test programme, or
50 hours in the case of the eco programme).
Test cycle
The appliance must be disconnected from the mains when the test programme ends (the display must go dark about 10 seconds
after the acoustic signal has been emitted, otherwise the tank could empty). The appliance should only be connected to the mains
power supply when ready to run the next test programme.
After waiting for a period of about 12 hours, it can be ensured model AS6T-41173 (with heat pump) has reached room temperature.