TM-50XL Quick Start Guide
D291720.6a
Page 1 of 4
Rev. 1, 6/7/17
This quick start guide provides basic setup and operating instructions for the TM-50XL. The intended use of the TM-50XL
Taping Machine is to produce taped reels of individually sealed and consistently orientated components. Use of this equipment
in any other way is not recommended.
Work Area:
The TM-50XL is designed to be operated in a temperature-controlled, light industrial setting. It should be installed
on a flat, dry, stable surface in a well-lit area.
Choose a table that is at least 72” x 30” to provide sufficient space for the
assembled machine.
See pages 2-4 for Quick Start instructions.
Front View
1.
Track
2.
Take-up Spindle
3.
Take-up Arm
4.
Cover Tape Arm
5.
Payout Arm
6.
Controller
Back View
7.
Cable & Power Connections
8.
Air Regulator
Physical Specifications:
Height:
15 inches (38 cm),
Width:
55 inches (140 cm),
Depth:
20.5 inches (52 cm),
Weight:
85 lbs. (38.5kg)
Power Required:
115/230 VAC, 50-60 Hz; 1.1 Amp, 120 Volts; .6 AMP, 220 Volts
Operating Environment:
Operating Temperature: 0°C - 50°C (32°F - 122°F), Maximum Humidity:
90% non-condensing
Only qualified personnel with the proper technical training, experience working on this type of
equipment, and awareness of the possible hazards should perform maintenance on the TM-
50XL.
The user is protected from moving parts and exposure to objects being ejected under pressure
by a metal enclosure. The TM-50XL should never be operated with the enclosure removed.
There are no internal parts that can be serviced by the user.
Always disconnect the machine from air and power supplies, placing the unplugged cables in
clear view before performing any maintenance tasks.
Detailed User’s Guides, maintenance instructions and troubleshooting are available on the V-TEK, Inc. website:
Contact Information
V-TEK, Inc.
751 Summit Ave
Mankato, MN 56001
TEL:
(507) 387-2039
website:
email:
1
2
3
4
5
6
7
8
