TWO WORKING MODES
HOW TO REPLACE BATTERY
Please press the buttons to
adjust working mode:
1. Press ON-OFF Button 1st time, the
lamp is turned on and work in Mode
A, which is default working mode.
2. Then press the Function Button,
the lamp enter Mode B.
3. Press the ON-OFF Button again, the
lamp turns off.
Mode A
Lamp will automatically lights up at night and keep 100% brightness at the first 3 hours, 70%
brightness for the next 2 hours, and then 50% brightness till dawn. The lamp will adjust brightness
according to the dynamic capacity of the battery.
Mode B
Lamp will automatically lights up at night and keep 100% brightness, after 6 hours or when battery
power is less than 30%, lamp turns off.
After 6 hours
Or when battery power is less than 30%
Func�on Bu�on
No-Use Bu�on
ON-OFF Bu�on
Battery Pack
18650, 7.4V,
2000mAh, 14.8Wh
1. Loosen the screws, open battery cover.
2. Disassemble the connector and take out the battery
pack.
3. Put the new battery pack inside and connect it well
with connector.
4. Lock the battery cover.
ENGLISH
Summary of Contents for VT-948
Page 9: ...264mm 589 55mm 967 55mm 1290 55mm 5 1 2 1 3 2 4 3 5 4 180 360 BULGARIAN...
Page 11: ...1 2 3 A 100 3 70 2 50 B 100 6 30 6 30 Battery Pack 18650 7 4V 2000mAh 14 8Wh 1 2 3 4 BULGARIAN...
Page 26: ...264mm 589 55mm 967 55mm 1290 55mm 5 1 2 1 3 2 4 3 5 4 180 Adjustable 360 Adjustable GREEK...
Page 27: ...1 2 3 100 3 70 2 50 100 6 30 6 30 Battery Pack 18650 7 4V 2000mAh 14 8Wh 1 2 3 4 GREEK...
