INSTALLATION INSTRUCTIONS
1. Switch OFF
the power
before starting
the installation.
7. Switch ON
the power to
test the light.
4. Install plastic plugs into the
drilled holes. Feed the cable
from the backside of the fitting
as shown in the diagram.
Using the screws install the
backside of the fitting on the
wall/surface.
5. Connect supply leads with
terminal brown (L) to brown,
blue (N) to blue & greenish-yel-
low ( ) to greenish-yellow.
AC: 220V
N
L
CLICK
CLICK
ON
6. Gently push fit the front cover/diffuser
to the backside fitting until you hear a click
sound. Ensure the fitting is properly fixed.
2. Drill holes on the wall/surface
using the fixing points or BESA
plates for conduit mounting
(Refer Table 1 & FIG A).
OFF
6mm
L1
3. Press the sides of the base
and gently remove the front
cover/diffuser. LED Batten
Fitting has safety straps inside
for hands free maintenance.
