6 Installation
Figure 6-5 Connect the Battery Pack Power Cable
2 Connect Power cable
Use the negative power cable to connect the negative bus bar with the battery
negative (‘-’) terminal, and use the positive power cable to connect the positive
bus bar with the battery positive (‘+’) terminal.
A. Use the communication cable to connect the battery packs in series through
the RS485 communication port, and connect the battery packs at the end to the user's
RS485 communication port through the RS485 communication port.
B. Assign addresses to battery packs. Assign addresses to battery packs by dialing
the dialing keys of the dialing switch. Please refer to 5.2.3 about the correspondence
between DIP switch and battery pack address.
3 Connect Communication Cable
Figure 6-6 Connect RS485 Communication Cable
