TWO OPTIONAL WORKING MODES
NOTICE
INSTALLATION
MODE A
MODE B
1. Press the button 1st time, the lamp flashes once and enter Mode A.
2. Press the button 2nd time, the lamp flashes twice and enter Mode B.
3. Press the button 3rd time, the lamp flashes 3 times and then turns off.
Lamp automatically lights up at nigh, automatically turns to full brightness when motion is
detected in the range ≤6m,then dims to low brightness after 10 seconds of no motion.
Lamp automatically lights up at nigh, automatically turns to full brightness when motion is
detected in the range ≤6m, then turns off after 10 seconds of no motion.
1. This is a solar powered lamp, please install it in a location where can get efficient sunlight.
2. Please note the lighting time depends on sunshine duration & work mode.
3. Built-in intelligent IC is with over-charge and over-discharge protection, safe and durable.
4. When the lamp is turned off, it still can get solar charging at day time.
5. The lamp is equipped with an internal battery pack, which is replaceable.
If any need, please contact the seller for support.
6. Non-professionals please do not disassemble the lamp.
7. Please do not dispose the battery with household garbage to avoid explosion.
1. Drill a hole with a diameter of 6mm and a depth of 50mm.
2. Fix the expansion plug in the hole.
3. Fix the lamp with screw.
1. Drill a hole with a diameter of 6mm and a depth of 50mm.
2. Fix the expansion plug in the hole.
3. Fix the screw into the expansion plug, allow the screw to protrude slightly by about 4mm.
4. Pull out the hook on the back of the lamp, and hang it up.
Installation 1: Wall Mount
Installation 2: Hanging
ON/OFF/Switch Work Mode
