Step 4.
Replace the pole
clamp (14) and at the
same time raise the
chrome adjustable pole
(13) then tighten the
clamp (14).
Attach the fan assembly on
top of the pole and tighten
the pole retaining screw
(12).
Note:
the adjustable pole
(13) can sometimes slip
inside the lower base pole
(15) during transit.
Step 5.
Note the Rear
Guard locating pins on
the Motor Housing (7).
Step 6.
Place the rear
guard (5) over the
pins on the motor
housing (7) and
replace the Rear
Guard Central Fixing
(4) nut by screwing it
back clockwise.
Note:
the carry
handle is at the top:
Guard
locating pins
FIG 4
FIG 5
FIG 6