V-TAC VT-4016-3 User Manual Download Page 10

Page: 10 / 10

In case of any query/issue with the product, please reach out to us at: [email protected] For More products range,

inquiry please contact our distributor or nearest dealers. V-TAC EUROPE LTD. Bulgaria, Plovdiv 4000, bul.L.Karavelow 9B

OPERATING INSTRUCTIONS

• Place the fan in the desired position ensuring that it is level and stable.

• If desired, the fan guard can be tilted up and down to alter the direction of the airflow.

Note:

do not adjust the fan whilst connected to the mains and/or switched on.

Slacken the Pole Clamp (14) and adjust the fan to the desired height using the Adjustable Pole

(13), tighten the pole clamp once the desired height is set.

Note:

the adjustable pole (13) can sometimes slip inside the lower base pole (15) during transit.

Press the ‘0’ button on the pedestal to ensure the fan is off.

Insert the mains plug into the nearest socket.

• Press the 1 button for fan low speed.

• Press the 2 button for fan medium speed

• Press the 3 button for fan high speed

Note:

Press the ‘0’ button to switch off the fan.

MAKING YOUR FAN OSCILLATE FROM SIDE TO SIDE

• Press the oscillation control (8) down to enable the fan to oscillate from side to side.

• Pull the control up to stop the fan oscillating.

CARE AND USE OF YOUR FAN

• Ensure that the fan is not connected to the mains supply before cleaning.

• Wipe the fan body with a clean, soft damp cloth.

• Do not immerse the fan or its cord in water or any other liquid.

Summary of Contents for VT-4016-3










