PRODUCT ASSEMBLY
Step 1.
Take the two base
cross members (18) and
push the 4 base end caps
(19) into the ends if not
already fitted and then cross
them over together.
Step 2.
Remove the four
screws from the two base
members and attach the
lower base pole (15) to the
base using a pozidrive
screwdriver (not supplied).
Step 3.
Unscrew and
remove the pole clamp (14
– shown in step 2 above)
and slide the screw cover
(16) down over the adjust-
able and lower base pole
(13 & 15) until it is in place
over the screws.
FIG 1
FIG 2
FIG 3