4
Side Panel
Switching GAIN between HI/LO
Set the GAIN switch to HI or LO to switch the gain on
the headphones. When set to HI, high quality sound can
be played on both normal portable headphones and high
sensitivity headphones.
Using RESET
If VAMP freezes (fails to respond to operations), set the RESET
switch to OFF, then ON, and back to OFF again.
Caution:
Use the point of a pin or a precision screwdriver to move the switch. Using an easily
breakable item to move the switch may cause a fragment to break off and become lodged in the VAMP,
which may cause short-circuits or other malfunctions. Please use caution when moving the switch.
Mini-USB port
RESET switch
Resets and initializes the VAMP.
When resetting, set the ON/OFF switch to ON and then set it back to OFF.
* VAMP will not run if the switch is left to ON. Always return the switch to OFF.
* See Settings for more information about setting GAIN and RESET.
GAIN switch
Switches the headphone output gain between HI (high) and LO (low).
Remaining battery charge indicator
Displays LEDs indicating the remaining battery charge.
CHARGE indicator
Displays the battery charging status. *Not displayed during .
BATTERY/VQ button
• Press the button to verify the status of 7 and 8.
• Press and hold the button to switch to VQ mode.
* Only during headphone output.
* Switch between PURE/VQ sound modes, see page 10. Toggle switch for
red light (PURE Sound) or green light (VQ Sound)
