Using Optical Digital Sound Output
The VAMP headphone connector
can be used as an optical digital
audio output connector.
Use an optical digital audio cable (optical mini plug type) to
connect the VAMP (and iPhone) to an amplifer, D/A converter,
stereo system or mixer. This allows the iPhone audio source
to be reproduced in high quality (48 kHz/16 bit) Hi-Fi sound.
Caution:
The optical digital audio output connector lights red
while the power is on. This is not a malfunction.
Do not look directly at the beam of light.
Removing VAMP from iPhone
To remove VAMP from iPhone, press on the iPhone
from the opening on the upper left of the rear of VAMP.
Caution:
Be careful not to scratch the main camera
of the iPhone main unit.
Optical digital audio output connector /
headphone output connector
11
