Charging iPhone from the VAMP
1.
Set the toggle switch to
. The battery mark ( ) appears in the upper right
corner of the iPhone screen while the iPhone is being charged.
Caution:
When the VAMP is connected to a computer via USB cable, the internal battery
is charged first, and iPhone starts charging only after that is fully charged.
Syncing iPhone and PC with VAMP Connected
Set the toggle switch to . This setting allows the iPhone to synchronize with iTunes on the
computer and charge. During sync, do not operate switches or remove the USB cable.
1.
Connect the included USB cable between the
VAMP and the computer.
2.
Set the toggle switch to . The toggle switch LED lamp
turns off and synchronization starts between the iPhone and
iTunes on the computer connected via USB cable.
When the toggle switch is set to with the USB cable disconnected,
the VAMP turns off.
9
i +
USB port
