Version 28.07.2015
VL2-LR12-TS
P
a
g
e
10
2.4.2.
Connecting power and CAN-bus
Remove female 16pin LR connector of vehicle harness from the rear of the factory
monitor and connect it to the male 16pin LR connector of the 4pin cable.
Connect female 16pin LR connector of the 4pin cable to the male 16pin LR connector
of the factory monitor.
2.5.
Connecting peripheral devices
It is possible to connect 2 after-market AV-sources, an after-market rear-view camera and an
after-market navigation to the video-interface.
Before final installation of the peripheral devices, we recommend a test-run to detect
incompatibility of vehicle and interface. Due to changes in the production of the vehicle
manufacturer is always the possibility of incompatibility.
