V-fit PME-1, Assembly & User Manual

Page: 17 / 24

5
Assembly
Fit the correctly labelled (L or R) Dual Action Handlebar - Upper (3/4) into the
appropriate Dual Action Handlebar - Lower (5L/R) and secure in place using
4 x M8 x 40mm Hex Bolts (47) (from the front), 4 x M8 Flat Washers (20),
4 x M8 Spring Washers (23) and 4 x M8 Locking Nuts (42) for each side as
shown below. Assemble the Front Handlebar Covers (32 & 43) to the Rear
Handlebar Covers (31 & 34) over the Dual Handlebars as shown.
6
Fit the Handlebar (9) onto the bracket of the Handlebar Upright (2) and secure in
place using the Handlebar Cover (48), Spacer (19) and Handlebar Wing Knob (18).
Align the handlebar into a comfortable position and tighten Handlebar "T" Knob (18)
securely. Feed the Pulse Wires (45) through the hole on the side and out through
the top of the Handlebar Upright (20), fit the Grommet (44) around the wires and
push firmly into the hole, as shown below.
4
5L
9
48 19
18
45
44
45
29
2
5R
29
20
23
42
47
20
23
42
32
47
34
43
3
31
Page 1