Assembly
5
48
46
42
7
4
2
Attach the Rear Frame Stabiliser (4) to the underside of the
Rowing Rail (2) using 1 x M8 x 70mm Allen Bolt (42), 1 x M8
Small OD Flat Washer (48) and 1 x M8 Nylon Locknut (46).
Secure this in place by tightly fitting the Rear Stabiliser Knob (7).
6
Rotate the Rowing Rail back over to its in-use position and secure
Rowing Rail (2) in place with 1 x M8 Large OD Flat Washer (49)
and the Rowing Rail Pivot Knob (14), tightening securely.
Note: - It is imperative that the Large OD Flat Washer is fitted before
using your Air Rower.
14
49
Page
19
