background image

Exercise Monitor Instruction

BATTERY INSTALLATION 

To fit the necessary CR2032 BATTERY - (NOT SUPPLIED) to your Exercise Monitor, remove the BATTERY COVER  

at the REAR  of the 

monitor.  Carefully fit the battery by fitting between the exposed contacts in the battery compartment.  Ensure that all batteries are fitted with 

the '+' / '-' ends matching the outline on the sticker or in the battery compartment.  For this Exercise Monitor the Positive (+) side of the 

Battery should face UP.  Failure to fit the battery correctly may result in damage to your Exercise Monitor that is not covered by guarantee.   

 

To conserve BATTERY  power the Exercise Monitor will shut down after approximately 4 minutes of inactivity. 

 

 

 

PLEASE

 

DISPOSE OF OLD BATTERIES CAREFULLY AND CONSIDERATELY. 

 
 
 
 
 

 

 

 

CUSTOMER NOTICE -

 

EXERCISE MONITOR CABLE CONNECTION

 

In most cases where there is an apparent failure of your Exercise Monitor to work, it is due to 

 

incorrect fitment of the Exercise Monitor cable connections. So, please ensure that there is

 

NO GAP between the connectors on the Exercise Monitor cables when finally assembled.

 

For Jack Plug  fittings, push together the Male and Female ends to make initial contact. Push 

 

again to make final connection. When fitted correctly, the Jack Plug faces touch each other.

 

For 2-Pin  fittings, ensure that you carefully line up the contacts in both of the 

 

connectors and then push firmly together ensuring that the clips lock together.

 

Before contacting our Customer Support Team (see contact details below), please 

 

re-check all cable connections, disconnecting and re -making where necessary.

 

Should you encounter any difficulty with the operation of your Exercise Monitor that is not 

 

solved by re-connection, please return it to us at the address below for inspection.

 

 

WE REGRET THAT ARE UNABLE TO REPLACE ANY

 

DAMAGED 

 

OR FAULTY UNITS BEFORE INSPECTION BY US.

 

We reserve the right to repair or replace the Exercise Monitor at our discretion.

 

 

Beny Sports Co. UK Ltd.

Unit 8 Riparian Way, The Crossings, Cross Hills, West Yorkshire. BD20 7BW

Tel: - 01535 637711

Fax: - 01535 637722

e-mail: - [email protected]

CUSTOMER SUPPORT is open from 9.00am to 5.00pm from Monday to Friday

 

 

Page 1

3

Summary of Contents for CYCLE-ATC-16/3

























Reviews: