V.Brøndum RONDA 370, User Manual

Page: 38 / 48

USER MANUAL
RONDA 370 38 V. BRØNDUM A/S
Applications
RONDA 370 is a water collecting appliance in accordance with DS/EN 60335-2-2 and CEI/IEC 60335-2-69 and
may only be used as such. RONDA 370 may be used for collection of warm clean and dirty liquids. RONDA
370 may not be used for collection of hot, acid or basic liquids and liquids containing a high concentration of
wearing particles. Collection of strongly wearing particles will reduce the life of the machine.
RONDA 370 is not approved for collection of flammable, explosive, poisonous or health hazardous dust, fluids
or gasses. RONDA 370 is not approved according to CEI/IEC 60335-2-69 Annex AA concerning collection of
health hazardous substances.
Mode of Operation
The container is filled with the quantity of water wanted or connected to the water supply. If the machine is
connected to the water supply, the float valve will maintain a constant level (approx. 15 litres) in the machine.
NB: Connection to the water supply may imply more water than the machine will be able to collect at a
time.
Liquid is pumped to the tool. The supply volume is controlled by the valve of the tool. When the volume is
adjusted, the pressure will rise, and the spring-loaded circulation valve will automatically conduct the excess
water back to the container.
When liquid /sludge is sucked into the machine, the liquid will be filtered through the collection bag. The liquid will
continue to the collection container and can be reused as process water.
If water comes out of the machine by the motor top, the machine must be stopped immediately.
Valve 0.2 –
2 bar
Water connection
Connection to
tools
Hose connection for collection of
sludge / liquid