20
meter.
Do not apply voltages in excess of 1000VAC or
750VAC between the common terminal and
earth ground in case of electric shock or damage
to the meter.
The meter's DC voltage range is
:
600.0mV
、
6.000V
、
60.00V
、
600.0V
、
1000V
AC voltage range is
:
6.000V
、
60.00V
、
600.0V
、
750V
1
)
Set the switch to DC voltage position
。
or
AC voltage gear.
2
)
Connect the red and black test leads separately to
COM and input jack.
3) Measure the other two ends of the test pen and
connect it to the voltage source or both ends of the load.
4) read by the LCD monitor the measured voltage
value. When measuring DC voltage, the display will be
simultaneous
Shows the polarity of the voltage connected to the red
test lead.
Note
:
1) In the small voltage range such as DC 600mV and AC
6V range, the test leads are not connected to the measured
power
LCD, there will be beatings on the LCD. This is normal
because of the high sensitivity of the meter. When the
meter is connected to the circuit under test, a real
measured value is obtained.
2
)
“
” Indicates the maximum input voltage is 750V AC