UWE VOC Series, Operation Manual

Page: 18 / 21

c. UNIT WEIGHT window shows
“
Add . XX
”
, for
“
XX
”
is the number of transactions saved in memory,
while the TOTAL COUNT window will show the accumulated result with TOTAL indicator on.
Both information will remain on display for 1 second and return to normal weighing
d. M+ indicator is switched on meaning there are data saved in memory
e. Remove item from platter and repeat the above steps to save the next transaction
5.4.2 To Recall From Memory
a. Press MR once to recall the total amount of transactions saved in memory, WEIGHT window
shows the total accumulated weight, UNIT WEIGHT window shows
“
tot. XX
”
, for
“
XX
”
is the
number of transactions saved in memory, while the TOTAL COUNT window will show the
accumulated quantity with TOTAL indicator on
b. Information on display will show for 3 second and return to normal weighing
5.4.3 To Delete From Memory
a. Press MR to recall the accumulated data from memory
b. Press CL after MR is pressed
c. Memory is cleared and M+ indicator is off
d. If any other key instead of CL is pressed after pressing MR , memory will not be deleted
5.5 HOW TO USE CHECK FUNCTION
The check function provides an audible warning towards the upper limit set by user for either total
quantity or gross weight
a. Press CHK and display will show CHECK on TOTAL COUNT window
b. Use numeric keypad to enter either the upper limit for quantity or weight
c. If the value entered is for total quantity, press QTY SET ; if the value entered is for weight, press
WT. SET
d. If the value entered is incorrect, press CL to clear the value. If the intend function is wrongly
pressed, restart the check function
e. To cancel the check function, press CHK first and press digit key
“
0
”
. When the value 0 is flashing
in the UNIT WEIGHT window, press either QTY SET or WT. SET to cancel the function which was
previously engaged
5.6 AUTO PIECE WEIGHT ENHANCEMENT FUNCTION
This scale equips with auto piece weight enhancement function, which activates automatically
when the piece weighing is obtained through 5.3.1 Automatic Sampling . This function provides a
constant monitoring on the changes on the unit piece weight to obtain the most precise counting
result. The updated unit piece weight will show on the UNIT WEIGHT window follows by a short
beep.