UWE VOC Series, Operation Manual

Page: 11 / 21

e. Press MR to select between Sd.on or Sd.oFF
f. Press ZERO to confirm and exit the current function, display shows F19(or Fx)
g. Press ZERO to enter the next function, or press M+ to exit. When M+ is pressed, display will
show SAVE , user can either press ZERO for yes to save the changes made or press CL for not to
save the changes.
4.1.7 Auto Tare
Under this function, user can enable or disable auto tare function of the first weight or continuous
taring the weight.
a. Indicator is off
b. Press and hold TARE and press ON/OFF , display shows F1
c. Continue pressing TARE until display shows F9
d. Press ZERO to enter, and display shows tr.oFF
e. Press MR to select between tr.on or tr.oFF
f. Press ZERO to confirm and exit the current function, display shows F16(or Fx)
g. Press ZERO to enter the next function, or press M+ to exit. When M+ is pressed, display will
show SAVE , user can either press ZERO for yes to save the changes made or press CL for not to
save the changes.
4.1.8 Transmission Protocol
Under this function, user can select the transmission interface, speed, mode and format for RS-232
and also the communication protocol.
a. Scale is off
b. Press and hold TARE and press ON/OFF , display shows F1
c. Continue pressing TARE until display shows F5
When display shows F5 , press ZERO to enter the function
First level selection: nonE / rS232
Second level selection: bAUd / ProtL
Selection under
bAud
: 4800 / 9600 / 19200 / 38400 / 115200bps
Selection under ProtL : n.8.1 / E.7.1 / o.7.1 / E.8.1
use MR key to select, M+ to change, ZERO key to confirm
d. Press
ZERO
to confirm and exit the current function, display shows
F6
e. Press
ZERO
to enter the next function, or press
M+
to exit. When
M+
is pressed, display will
show
SAVE
, user can either press
ZERO
for yes to save the changes made or press
CL
for not to
save the changes.
Terminology:
nonE
: no data output
rS232
: data output through RS-232 only