KEYS DESCRIPTION
1. ON/ZERO KEY
Press this key to turn scale on or set weight to zero.
Refer to
SPECIFICATIONS
for maximum zero range.
2. TARE KEY
Press this key to tare off the weight of a container.
Refer to
SPECIFICATIONS
for maximum tare range.
3. NUMERIC AND DECIMAL KEYS
Press these keys to attain the desired numeric value.
4. OFF KEY
Press this key to turn scale off.
5. CLEAR KEY
Press this key to clear the numeric figure entered
6. UNIT PIECE WEIGHT SET KEY
Press this key to enter a unit piece weight.
7. NUMBER SET KEY
Press this key to enter the number of pieces on platter.
8. CHECK KEY
Press this key to set upper weight and quantity check
limit.
9. M+ KEY
Press this key to add current total count to memory.
Note: When the
WEIGHT PANEL
shows a negative value, the
total count will still give a positive count value. The
quantity is still added to memory when M+ key is pressed.
10. MR KEY
Press this key to recall accumulated results.
11. PLU KEYS
Press this key to set/recall a unit piece w eight to/from
a PLU.
INDICATORS DESCRIPTION
12. ZERO INDICATOR
When a zero weight is detected, an arrow will appear
and point at this indicator.
13. NET WEIGHT INDICATOR
When the tare function is in operation, an arrow will
appear and point at this indi cator. The weight being
displayed on the
WEIGHT PANEL
is a net weight.
14. LO-BAT INDICATOR
This indicator turns on when the battery inside scale
is low.
Recharge the scale immediately. Failure to do
so may cause unrecoverable damage to the battery.
