NOTE 1
: If no unit piece weight is applied, only weight
data will be saved to memory.
5.9.2 Adding Quantity to Memory Manually
Follow the below procedures to add quantity to memory
a.
Remove all lo ads from platter
b.
Make sure that the
ZERO INDICATOR
appear and the
NET
INDICATOR
disappears
c.
Enter the desired quantity to be added to memory
through numeric keys
d.
Press
M+
e.
Quantity is now added to memory
5.9.3 Recall Accumulated Data from Memory
a.
Press
MR
b.
Scale displays "
tOt.#
" on the
WEIGHT PANEL
.
#
Denotes
the total number of entries saved to memory. Then,
the total accumulated weight and total count are
displayed on the
WEIGHT
and
TOTAL COUNT PANEL
respectively
c.
The scale will return to normal operation 2 s econds
after the accumulated data is displayed
NOTE
: Data stored will be erased when the scale is turned
off.
5.9.4 To Clear Accumulated Data from Memory
a.
Press
MR
b.
Total accumulated data will be displayed on 3 display
panels
c.
Press
CLEAR
d.
All data is cleare d now
e.
The scale will return to normal operation
5.10 CHECK FUNCTIONS
This unit is equipped with check functions. When quantity
or weight reaches or excesses the preset value, a
continuous audio beep and flashing display will be
activated.
5.10.1 Set Q uantity Check Limit
a.
Press
CHECK
b.
Scale displays
CH.__
on
UNIT WEIGHT PANEL
c.
Enter preset quantity value through numeric keys
d.
Value entered is shown on the
UNIT WEIGHT PANEL
e.
Press
NUMBER SET
to confirm
f.
Scales displays
CH._PSC
on the
UNIT WEIGHT PANEL
while the value entered on the
TOTAL COUNT PANEL
g.
Scale return to normal operation within 2 seconds
5.10.2 Set Weight Check Limit
a.
Press
CHECK
b.
Scale displays
CH.__
on
UNIT WEIGHT PANEL
