4
¡ G
Press this key to enter parameter setting / calibration (when Calibration
Switch is at ON position)
¡ G
Parameter Setup Key (to be used with
SET
)
¡ C
¡ G
Calibration Key (to be used with
SET
)
¡ C
¡ G
Normal Operating/Standby key
2.2 BACK PANEL LAYOUT AND DESCRIPTION
1. AC Power Socket
2. Printer Interface (D-SUB 25PIN)
3. OP-5L External Display Interface (4PIN)
4. Load Cell Connector (8PIN)
5. Voltage Switch (110V / 220V)
6. RS-232 Interface (D-SUB 9PIN)
7. CAL. SW (when switch to left, function setup and calibration is disabled)
SET
S
=
S
M
STANDBY
OPERATE