Uwatec X-Tek, User Manual

Page: 41 / 45

40
Procedure:
1.
Set the tanks parallel, the valves showing in one direction.
2. Screw the connector manifold into a valve. The space between A and B, (see picture
above) should be exactly the same as the measure between the clamps. (See sample
drawing page 37).
3. Fit the clamps on the Double Tanks and fix it, as described on pages 38-39.
4. Rotate the connector careful into the valves. Take a tape measure and gauge the distance
between the valves to obtain the exact distance.
Space to be measured
A B
IMPORTANT!
Make sure that the space between the valves is exactly the same as those of the bands;
otherwise the valve manifold can be damaged.