Uwatec X-Tek, User Manual

Page: 34 / 45

33
English
Attachment: SOFT BACKPLATE ON X-TEK FORM HARNESS
!
WARNING
Check the tightness of the screws and nuts before each dive. The system must be
securely fastened together to be used safely. Failure to check the security of the system
may lead to the tank becoming detached before, during, or after the dive and could lead
to serious injury or death
1. Place the soft backplate onto the bladder with the loops facing down and the Super cinch
buckles on the left.
2. Place the bladder onto the back of the Form Harness. Make sure that the grommets on the
soft backplate, bladder, and Form Harness line up with each other.
3. Insert the screws from the bottom through the grommets and tighten the nuts securely.
Tip: Start at the top of the outer eyelet to the left and then the outer eyelet on the top right.
Following the numbers shown below (1-6).
1
4
5
3
6
2