Uwatec X-Tek, User Manual

Page: 13 / 45

12
4. Attach the right shoulder pad by threading the strap through the top pad loop. Make sure
that the webbing is on the outside of the pad. (The exact adjustment of the shoulder pads is
described on page 34).
5. Thread a three bar slide on the right side to the shoulder pad.
6. Thread a bent D-ring to the top of the three bar slide. Make sure that the curve of the D-ring
shows to the top.
7. Thread the end of the strap through the second slot of the three bar slide.
a. b.