Uwatec Aladin Air z, Operating Manual

Page: 25 / 86

25
3 Dive Computer
II Uwatec ® Aladin ® Air Z
English
II
3.2 Operating modes Aladin
®
Air Z works in various operating modes:
Sleep-mode:
Activation: automatically
When Aladin
® Air Z is not used it is in the so called sleep-mode.
In this case, the electronics are «sleeping» for the most part, the display does
not show any information. The computer is briefly activated once every minute
to measure atmospheric pressure. The display remains switched off. If a change
in altitude is recognized, Aladin
® Air Z switches to —> surface-mode for
3 minutes.
Ready-mode:
Activation: By touching contacts B and E from sleep-mode.
To check the display, all signs light up for 5 seconds.
Aladin
®
Air Z switches into ready-mode afterwards. In ready-mode, the display
is switched on and in certain circumstances altitude sections are also displayed.
If the paired transmitter is switched on and located within transmitting
distance, the tank-pressure is displayed, in other cases only <--->.
On touching contacts B and E in ready-mode once more, Aladin
®
Air Z displays
the remaining battery capacity in percent. Three minutes after activating ready-
mode, Aladin
® Air Z falls back into —> sleep-mode.
depth dive time
max. depth deco info
h
h
m
ft
NO STOP
DO NOT FLY
DESATURATION
S
L
O
W
DIVEPLAN
LOGBOOK
DIVE
SPEED
%
depth dive time
max. depth deco info
DECOSTOP
tank data
psi
bar
depth dive time
max. depth deco info
tank data
bar
tank data
with transmitter without transmitter