Set the start to end time period and the sedentary time interval (minutes) in the APP, click
to enter the repeat setting only once or select the sedentary reminder date (week). When
the sedentary time is reached, the watch will vibrate and there will be a sedentary icon.
10. Drink water reminder
Set the start to end time period and frequency (minutes) in the APP, click to enter the
repeat setting, select the drinking reminder date (week), check the drinking reminder and
save it. When the reminder time for drinking water arrives, the watch will vibrate and there
will be a drinking water icon.
11. Dial push
11.1 Push an existing watch face
Connect to the app, go to Device>Dial Push>Select Dial>, and make sure to replace it
with this dial. After the dial is synchronized, the watch will automatically restart and then
automatically connect to the app.
11.2.Customize the watch face
Connect to the APP, select Device>Dial Push>(Dials with pen icons belong to custom
dials) Custom Dial Settings>You can choose a custom background. After the dial is
synchronized, the watch will automatically restart and then automatically connect to the
app.
12. Firmware version
The version of the watch is displayed, and the user can choose to upgrade the firmware
version.
13. Unbind
Bind the watch to the app, unbind in the device, click OK and unbind, the IOS system
needs to go to the settings of the phone to ignore the Bluetooth device.
●Frequently asked questions and answers
*Please avoid exposing the device to extreme temperatures that are too cold or too
hot for a long time, which may cause permanent damage.
*Why can't I take a hot bath with my watch?
The temperature of the bath water is relatively changed, it will produce a lot of water
vapor, and the water vapor is in the gas phase, and its molecular radius is small,
and it is easy to seep into the gap of the watch case. The internal circuit of the
watch is short-circuited, which damages the circuit board of the watch and
damages the watch.
*No power on, no charging
If you receive the goods and the watch does not turn on, it may be caused by a
collision during the transportation of the watch and the battery Seiko board has
been protected, so plug in the charging cable to activate it.
