04
How to Use／Disassembly & Assembly
Disassembly & Assembly
Installing Handle
Instructions for disassembly and assembly of clear water tank
1. Insert the end of the handle into the port
of the main unit in the vertical direction
until there is a click sound. Make sure that
the handle is tight, that is, the installation
is successful.
2. To disassemble, insert a hard object into
the hole in the position as shown in the
figure, press the elastic needle, and pull
the handle upward at the same time.
1. To remove the clean water tank, hold the
body with one hand, press the clean water
tank button with the other hand, pull it out
as shown in the figure and take out the
clean water tank.
2. To install the clean water tank, put the
bottom of the clean water tank into the
opening of the body, and then gently push
the clean water tank until there is a click,
which indicates that the installation is
successful.
