2
Operating Instructions
1. For the first use, please note that the adaptor is stored inside
the device. To retrieve it, turn the unit upside down and
remove the base cover by turning it
counterclockwise.
2. Remove adapter and return base cover by turning it clockwise
until it is secured.
3. To enter standby state, connect the adaptor to the
device and
a wall plug.
4.
Press
POWER
on the control panel located on the top of
the device, or on the remote control. Your Tulip 2 will beep
and start up in ventilation mode. Lights on the top of the
device will indicate which purification and speed mode your
device is turned to.
5. To activate UVC disinfection mode, press the UVC button.
It is safe to run both the UVC and standard filtration
continuously, 24 hours a day.
6.
Use the
SPEED HIGH
,
SPEED MID
and
SLEEP
mode butons to select the desired filtration and disinfection
rate.
7. The filter lifespan is approximately 2200 hours. When the filter
has reached the end of its working life, the filter indicator on
the top of the device will illuminate and beep 8 times,
Speed Mid
Power ON/OFF
Speed High
Sleep
Filter
UV-C
3
