8
Mounting on Other Raspberry Pi Models
If you want to mount Zero2Go on other Raspberry Pi models, you will need to solder a
40-pin header (not included in package) on your Zero2Go.
Which type of header should you solder? It depends. If you intend to mount Zero2Go
on Raspberry Pi A+, B+, 2B or 3B, which has male 40-pin header onboard, you should
solder a female 40-pin header on Zero2Go. Optionally it could be a stacking header
which has extra long pins. Below is such an example:
If you are mounting Zero2Go on a Pi Zero with a female 40-pin header soldered, you
should solder a male 40-pin header on your Zero2Go. This is also
the suggested
way for driving high current devices
from Pi Zero.
After soldering the pin-header, mounting Zero2Go to your Raspberry Pi is the same
with mounting other HATs. Just connect the 40-pin headers together and it is done.
The pictures below shows how Zero2Go looks like when being mounted on Raspberry
Pi A+ and Raspberry Pi 3.
Summary of Contents for Zero2Go Omini
Page 11: ...9 ...