5
4. Connect Raspberry Pi Compute Module 4 to the Board
Before starting, it is recommended to install four metal standoffs underneath so the board can lay flat
on the desk. You can find four metal standoffs and four screws in the package. Just place the
standoff under the mounting hole and use a screw to secure it.
Connect Raspberry Pi Compute Module 4 to the board by simply aligning it with the two connectors
on board (or alternatively you can align the CE marks on CM4 and the board), and then give it a good
squeeze. It will crunch into place (and you can hear it).
Summary of Contents for PiGear Nano
Page 5: ...2...
