40
13. DSI and CSI
PiGear Nano has one DSI connector (DISP0) and one CSI connector (CAM0).
Different than the official Raspberry Pi Compute Module 4 I/O board, PiGear Nano uses I2C-1
instead of I2C-0 for DSI and CSI.
If you will use them, please run these commands in home directory and then reboot:
You can run this command to test your camera connected to CAM0:
pi@raspberrypi
:
~ $
sudo cp pgnano/bin/dt-blob.bin /boot/dt-blob.bin
pi@raspberrypi
:
~ $
sudo chown root:root /boot/dt-blob.bin
pi@raspberrypi
:
~ $
sudo chmod 755 /boot/dt-blob.bin
pi@raspberrypi
:
~ $
sudo raspivid -t 0
Summary of Contents for PiGear Nano
Page 5: ...2...
