UTV500CC User’s Manual www.UTVsFactory.com
20
VI
、
、
、
、
Running-in of new vehicle
Cooperation between the surfaces of each part of new vehicle is locating adjusting
and running-in phase, for surface friction of each part is big, the result of running-in
quality influences greatly using lifetime of farmer vehicle. In running-in period, please
implement strictly the regulation about speed limit, load limit and periodic maintenance
to reduce
1. Highest
speed:
Running mileage
Highest limit speed
Initial 800Km
40Km/h
800
～
1600Km
50Km/h
Exceed 1600Km
60Km/h
2. Accelerate and decelerate
It is necessary to avoid sudden and frequent acceleration and deceleration and
keep running in even speed in running-in period.
3. Heating engine before running
In running-in period, it is necessary to run at idling speed for 3-5 minutes after
starting engine to pre-heat engine, then start running after lubricating oil flows
on each friction surface.
4. Note engine cooling
In running-in period, it is necessary to note water temperature in engine to avoid
running in low temperature for long time and in high temperature without water,
this will strengthen abrasion and drag cylinder.
5. Check the loosing situation on each linking part of all bolts usually
