BLUETOOTH
(Menu > Settings & Tools > 3)
Bluetooth technology connectivity enables wireless connections between
electronic devices. If connected with a Bluetooth Handsfree device, you can
use your phone more freely. With DUN, you can also use the phone as a
wireless modem. It can also be used to connect wirelessly to products that use
Bluetooth wireless technology, such as computers. You can synchronize your
phone and your PC using Bluetooth connectivity. Since devices with Bluetooth
connectivity communicate using radio waves, your phone and the other
device do not need to be in direct line-of-sight. The two devices only need to
be within 10 meters (30 feet) of each other. The connection can be subject to
interference from obstructions such as walls or other electronic devices.
This device is compliant with Bluetooth specification 1.1, supporting the
following profiles: HSP V1.1 (headset profile), HFP V1.0 (handsfree car kit
profile), DUN V1.1 (dial-upnetworking), GAP (general access profile) and SPP
V1.1 (serial port profile). To ensure interoperability between other devices sup-
porting Bluetooth technology, use UTStarcom approved enhancements for this
model. Check with the manufacturers of other devices to determine their
compatibility with this phone. There may be restrictions on using Bluetooth
technology in some locations. Check with your local authorities or Verizon.
If you want more information on this function, visit the Bluetooth Technology
organization Web site:
https://www.bluetooth.org/
.
Important:
Features using Bluetooth technology, or allowing such features to run in
the background while using other features, increase the demand on battery power and
reduce the battery life.
BLUETOOTH ON/OFF
The Power feature allows you to turn the Bluetooth function on and off.
1
.
Press Left Soft Key
Turn On/Turn Off
to activate/deactivate Bluetooth
Turn On/Turn Off
Turn On/Turn Off
mode.
ADD NEW DEVICE
Pairing is the process that allows the handset to locate, establish and register 1-to-1
connection with the target device.
1
.
Select “Add New Device”, then press
OK
. If Bluetooth is turn to off,
“TURN BLUETOOTH POWER ON?” will appear.
Select “Yes” and press
OK
.
2
.
By pressing Right Soft Key
Options
, you can choose from the
following:
•
My Phone Name:
Your phone’s Bluetooth name will appear to other in-range Bluetooth
devices, depending on your discovery mode. Enter a new name and press
OK
to save
and exit.
•
Discovery Mode:
Turns Discovery Mode “on” or “off.” If Discovery Mode is turned on, other
devices will be able to find your device for one minute.
Chapter 4 − Menu Function
Settings
•
Supported Profiles:
Displays the following list of options.
1.
Headset:
Supports use of a compatible Bluetooth headset for mono voice.
2.
Handsfree:
Supports Bluetooth headsets, and may also support other installed
compatible Bluetooth devices with speaker phone capabilities, such as
car kits or a conference room device.
3. Stereo:
Supports use of a compatible Bluetooth headset for stereo voice.
3
.
Instructions ”PLACE DEVICE YOU ARE CONNECTING TO IN
DISCOVERABLE MODE” will be displayed. Highlight the device
and press
OK
.
4
.
The handset will prompt you for the passkey. Consult the Bluetooth
accessory instructions for the appropriate passkey (typically “0000”
- 4 zeroes). Enter the passkey and press
OK
.
The default PIN code may differ depending on Bluetooth devices. Please refer to the
user guide of the Bluetooth device that you wish to use.
5
.
Once pairing is successful, select “Yes” and press
OK
to connect with
the device.
6
.
Once paired, you will see the device listed in the “Add New Device”
menu. By pressing Right Soft Key
Options
, you can choose from the
following:
•
Remove Device:
Removing a device from the paired list.
•
Rename Device:
Renaming the paired device.
•
Incoming Security:
To Select “Always Ask” or “Always Connect”.
•
Device Info:
Reviewing information about the paired device.
SOUNDS SETTINGS
(Menu > Settings & Tools > 4)
CALL SOUNDS
(Menu > Settings & Tools > 4 > 1)
To select a ringer type for incoming calls:
CALL RINGTONE
(Menu > Settings & Tools > 4 > 1 > 1)
1
.
Select one of the available ring types >
OK
.
•
Up or Down Navigation Key:
“Get New Ringtones“
or select your desired
ringer type.
•
To play/stop sound, press Left Soft Key
Play/Stop
.
CALL VIBRATE
(Menu > Settings & Tools > 4 > 1 > 2)
1
.
Select “On” or “Off” with the Navigation Key up or down. >
OK
.
ALERT SOUNDS
(Menu > Settings & Tools > 4 > 2)
When selected, this setting alerts you to the following handset changes:
TXT MESSAGE
(Menu > Settings & Tools > 4 > 2 > 1)
1
.
Select “Tone”, “Vibrate” or “Reminder” with the Navigation Key up
or down and then select one of the following options by pressing
Menu Function − Chapter 4
37
Settings
Summary of Contents for TXT8010
Page 1: ...User Guide TXT8010...
