15
3
Before Configuration
NetSprite1023 provides Web-based management of the device.
To access the CPE, users can connect a PC to any one of the
Ethernet ports. The Ethernet and WLAN interfaces use the
same IP address (192.168.1.1/255.255.255.0) by default.
Login NetSprite1023
Users can access the CPE as following:
1
Set the IP address on the PC connecting to the CPE. The
IP address must be in the same subnet as the LAN
interface, for example, 192.168.1.10/255.255.255.0.
2
Open the Internet Explorer (IE) on the PC and enter:
http://192.168.1.1
.
3
The login window will appear as shown in Figure 5. Enter
the user name and password. The default user name and
password for administrator are both “Admin”.
NetSprite1023 also provides username of “user” and
password of “user123” for end-users.
3
Summary of Contents for NetSprite1023
