UTStarcom CDM8960, User Manual

Page: 46 / 90

VOICE TOOLS
MENU FUNCTION
93
H
CALL <NAME><LOC>
Use the Call command to voice dial a name from your contact list
or a phone number. When dialing a number, pronounce each digit,
but do not pause noticeably between the digits. If you experience
problems dialing by number, you can adapt digit dialing to your
voice with Settings -> Digit Dialing -> Adapt Digits.
 Press Side AVR Key , your phone turns to Voice
Recognition mode.
 Say “Call”.
Examples: - Call Tom Smith, - Call 617 555-1212, - Call
Bob Carson’s mobile, - Call Dee Harper at Home.
H
SEND <MSG TYPE>
Use the Send command to send a text or other type of message to
a specified name or number.
 Press Side AVR Key , your phone turns to Voice
Recognition mode.
 Say “Send” followed immediately by one of the
following items:
Examples: - Send Picture to Dee Harper’s Mobile, - Send
Text Tom Smith, - Send Video to Tom Smith’s Mobile.
• Text
• Picture
• Video
MENU FUNCTION
VOICE TOOLS
92
H
LOOKUP <NAME>
Use the Lockup command to retrieve and display information for
any name stored in your contact list.
 Press Side AVR Key , your phone turns to Voice
Recognition mode.
 Say “Lookup <Name>”.
Examples: - Lockup Tom Jones.
H
PLAY <PLAYLIST>
Use the Play command to playback a song from the playlist. Say
“PLAY” and your phone will playback the selected playlist for you.
 Press Side AVR Key , your phone turns to Voice
Recognition mode.
 Say “Play <Playlist>”.
H
GO TO <MENU>
Use the Go To command to open an application on your phone.
You can say ”Go To” by itself and be prompted to say the
application name, or you can skip the prompt by saying ”Go To”
followed by the application name.
 Press Side AVR Key , your phone turns to Voice
Recognition mode.
 Say “Go To” followed immediately by one of the
following items: