UTStarcom CDM7075, User Manual

Page: 80 / 162

79
SETTINGS
PROMPTS
The prompts settings, “Mode”, “Timeout’, and “Speed” settings will
allow you to set how you are notified by the voice command system, the
duration in which you can respond, and how fast the System will play
the prompts to you, when in Prompts or Readout mode.
1.
Press [MENU], then press 2 times for the "Settings &
Tools" menu. Press "VR Setting", then "Prompts".
2.
Select “Mode” or “Timeout”.
3.
Press to save the setting.
CALL ALERT
The “Call Alert” setting controls how you are notified when receiving a
call. “Name + Ring” will first announce the name and then play the set
ring tone. “Ring only” will play the set ring tone only. “Name Repeat”
continuously, states the name or number until the call is answered or
incoming call alert ends.
1.
Press [MENU], then press 2 times for the "Settings &
Tools" menu. Press "VR Setting", then "Call Alert".
2.
Select “Ring Only”, “Name+Ring” or “Name Repeat”.
3.
Press to save the setting.
• Mode : Select “Prompts” or “Tones Only”.
• Timeout : Select “5 seconds” or “10 seconds”.