Bringing into Service
Page 17 of 42
Port/Interface Description
CryptoServer LAN V4 (Figure 1 and Figure 2)
a1, a2
Power supplies
a3, a4
Power supply sockets 90 V ~ 246 V (AC)
a5, a6
Power supply switches (switches power on/off) plus control light (green) above
a7, a8
Screws for attaching the power supplies
a9
Control light for the operation status of both power supplies:
■
green – normal operation
■
red – alarm status if a power supply fails or is switched off; A signal tone
sounds.
a10
Mute key for the signal tone that sounds if a power supply fails or is switched off
a11
CryptoServer CSe-Series or Se-Series Gen2 plug-in card
■
CryptoServer CSe-Series plug-in card
Figure 3: CryptoServer CSe – Sockets and ports on the rear side
▣
A – Erase pushbutton
▣
B – USB 2.0 port of the CryptoServer CSe
■
CryptoServer Se-Series Gen2 plug-in card
Figure 4: CryptoServer Se-Series Gen2 – Sockets and ports on the rear side
▣
C – Erase pushbutton
▣
D – LED flash light – indicates the activation of the Erase push-button
▣
E – USB 2.0 port of the CryptoServer Se-Series Gen2
C
E
D
A
B
