9
WARRANTY
commercial or retail application. The warranty is limited to use in a residential environment. We will repair or
replace (at our option) the unit in the original color and style if available, or in a similar color and style if the original
item has been discontinued, without charge. Defective units must be properly packed and returned to the
manufacturer with a letter of explanation and your original purchase receipt showing date of purchase.
Call 1-866-994-4148 to obtain a return authorization number and an address where to ship your defective product.
Note: C.O.D. shipments will NOT be accepted. The liability of the manufacturer is in any case limited to
labor costs or injury which is caused by the product. This limitation upon the liability of the manufacturer includes
any loss, damage, labor costs or injury which is (I) to person or property or otherwise; (II) incidental or
consequential in nature; (III) based upon theories of warranty, contract, negligence, strict liability, tort, or otherwise;
and you may also have other rights which vary from state to state.
Printed in China
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE
CORRECTIVE ACTION
A
Security light comes
1. Dusk-to-Dawn sensor is
on during the day.
a shaded area and is
fooled into thinking it
mounted in an area that does not allow enough
is nighttime.
light to enter the sensor. Relocate security light.
2. Dusk-to-Dawn sensor
2. If under warranty, contact Customer Service.
is faulty.
Security light cycles ON
1. Dusk-to-Dawn sensor is 1. Change the position of the light head, aim light
and OFF continuously.
from the security light.
2. Put a small piece of black electrical tape over
the Dusk-to-dawn sensor.
3. Relocate the security light to a different location
Security light comes
1. Light is sensing motion 1. Make sure the sensor is not picking up moving
on for no apparent
in the detection zone.
reason at night.
2. Test the motion sensor by covering up the front
curved lens with cardboard to block the view. If
the light turns off then something in the
detection zone is triggering the sensor.
Reposition the motion sensor or change the
sensitivity (distance) of the sensor.
Lowes.com
Utilitech & UT Design® are registered
trademarks of LF, LLC. All Rights Reserved.
