ASSEMBLY INSTRUCTIONS
4. Connect the supply leads from the electrical box to the
fixture wire leads using the wire nuts (AA) (Fig. 4). The
black
lead from the fixture pan (A) is spliced to the
black
supply lead, and the
white
lead from the fixture pan (A) is
spliced to the
white
supply lead. Make sure the wire nuts
(AA) are tight. You can wrap electrical tape around the
wire nuts (AA) to prevent them from coming loose.
Carefully push the spliced wires back into the electrical
box.
5. Position the fixture pan (A) over the electrical box so
that the threaded tube (DD) protruding from the
mounting bracket (EE) passes through the hole in the
back of the fixture pan (A). Secure the fixture pan (A) to
the electrical box with the finial cap (CC) (Fig. 5). Make
sure the fixture pan (A) is level. The fixture pan (A)
should be tight up against the wall surface.
6. Grasp the bulb (C) by the plastic base, and align the
pins on the bulb (C) with the socket (Fig. 6). Rotate the
bulb (C) clockwise approximately 1/4 turn until the bulb
(C) base is secure in the socket.
7. Push the diffuser up, apply sufficient pressure to it
and rotate it clockwise until it screws in securely to the
pan (Fig. 7).
Restore power to the electrical box to make sure your
fixture is working properly.
AA
A
AA
CC
DD
C
A
CC
Finial
Cap
x 1
Hardware Used
Threaded
Tube
DD
x 1
4
5
7
AA
Wire Nut
Hardware Used
x 2
A
B
C
6
Lowes.com
4
