Rendering Machine V2______________________________________________________________________________________
20
• In winter time, after carrying out works trough wet streets with salt, clean the frame with water.
• Remove the dirt of the wheels regularly.
• Reference and serial numbers should always remain readable.
• Do not carry out welding works in the frame.
Maintenance and repair works should only be carried out by an authorized shop.
Use exclusively original UTIFORM parts.
The frame is suitable, according to the chosen version, for the transport by car. Traffic norms in force
must be respected in the country of origin of the machine as well as in the rest of destination countries
where the V2 will be transported.
* Trailer hook adjustable height
The trailer hook (3) has several regulation points, which allows an easy and comfortable
height regulation.
Please check the trailer’s hook each time you go on the road
* Rubber suspension axis without brake
Do not carry out welding works in the axis!
The axis is housed in itself with rubber bodies and with its bearing; it is maintenance free.
It can not be greased.
* Pneumatic wheels
When changing the wheel keep in mind that the correct hubs correspond to the connections of the
wheels. (58-98/4).
• The maximum pressure in the pneumatic wheels is 3 bar.
• Press the knuckle joint screws in the moment of the marked turn.
• The tires have to correspond to the axis data.
• The tightening couple of the fixing screws from the Wheel to the axis pillow must be 90 Nm.
6.2
Preparation for transport
When road transport is carried out, it is necessary to keep in mind the national norms of the
country in which the V2 will be transported.
• The electric system used in the illumination of the V2 consists of a tension of 12 V, keep it in mind in
the traction vehicle, (12 or 24 Volts), before carrying out the connection between both vehicles.
Pay attention to the correct function of the illumination system!
• The hopper and mixer should be completely empty.
Transport the machine with the gas oil deposit totally empty. The circulation stability is harmed
by the weight added.
• Clean the machine.
• Control the pressure of the pneumatic tires and the nuts of the wheels.
Pay attention to the good adjustment of the wheels and the good pressure of the tires.
Supplied by :- Markham (Sheffield) Ltd - Tel:- +44 (0)1909 730861 - www.markham-sheffield.co.uk
