background image

© 2021 UTC RETAIL 
All rights reserved.

 

11977004 Rev A 

Battery Indicator 
 

The tablet power indicator light is located on the lower left of the tablet screen.   
 

  A green light indicates battery is fully charged 

  An orange light indicates the battery is charging 

  A flashing red light indicates the battery is low 

  A red light indicates the battery is nearly depleted   

The tablet power indicator light will turn off when removed from the base stand. 

 
Base Stand I/O Panel 

 
 

 

 
The I/O panel located at the bottom of the base stand (pictured above) is labeled and contains: 

  Locking 19V power input jack 

  LAN port 

  3 USB 2.0 ports 

  2 COM ports 

  2 powered USB ports (24V, 12V) 

  Cash drawer port 

There is one USB 2.0 port located on the front of the base stand. 

 

Projected Capacitive Touch Screen 

 

The T6100 has a durable projected capacitive multi-touch screen that has been factory 
calibrated and will not require any additional driver installation when used with most current 
operating systems, such as Windows 10.

 

 

For additional assistance, please contact your account representative or:

 

UTC RETAIL 

100 Rawson Road 
Victor, NY 14564 
Phone: 1.800.349. 0546 or (585) 924.9500 

www.utcretail.com

 

Summary of Contents for T6100






Reviews: