Utax P-4030D, Service Manual

Page: 187 / 219

2LV/2L1/2L2/2MS/2MT-3
2-4-12
(5) System Error (Fxxxx) Outline
The document is subscribed to describe the outline of the factors of the Fxxx errors that are not described in
the service manual. Please utilize it to refer to checking the factors.
Note: Please initially check the following when the error (Fxxx) is indicated.
Check the DDR2 memory and neighboring parts : Check the contact with YS1 on the main PWB by releasing
and reinserting the memory, and check if the foreign objects such as the dust don’t adhere inside and if the
pins aren't deformed. If the error repeats after that, replace the memory.
Check the SSD (optional HD-6) if the error repeats after replacing the memory.
The storage data in the SSD is initialized when formatting or replacing the SSD.
Thus, newly install the data in the formatted SSD or new SSD.
Check the SSD: Replace the SSD if the error repeats after formatting the SSD (Note1).
Note1: Procedures for formatting the SSD. (It is also indicated at Operation Manual.)
1. Press <MENU>.
2. Press the up/down arrow keys and select [Device Common]. Press <OK>.
3. Press the up/down arrow keys and select [Format SSD]. Press <OK>.
4. The confirmation screen (in the figure below) appears. Press [Yes]. (Press the left arrow key.)
5. [Formatting…] appears and formatting SSD starts.
→
After finishing the formatting SSD, the screen is recovered to the standby screen.
Caution: Formatting SSD The following storage data in the SSD (optional HD-6) is initialized after formatting
the SSD. (Back-up from the SSD is not available.)
Font data, API data, Macro data, Printable data, Document box,
Job storage (User box/Quick copy/Proof and hold/Private print/Job storage)
Format.
Are you sure?
--> SSD
[ Yes ] [ No ]