Utax LP 3130 Instruction Handbook Manual Download Page 77

Page: 77 / 110

Troubleshooting

5-5

Understanding Indicators

The

indicator

displays generally fall into one of three categories: normal

operation, maintenance and errors (repairs).

Click the icon

to play the animation of the indicator combinations.

Right-click an indicator, then select

Playback

and

Play

to play the

animation repeatedly.

Normal Indication

The table below shows the indicator combinations when the printer
status is normal.

IMPORTANT

To play the animation, you have to install Adobe Flash

Player and Adobe Reader (Version 6.01 or more) to your PC. If the
animation is not displayed, you should get the latest version from
Adobe site (http://www.adobe.com/downloads/).

Indicator

Meaning

The printer is canceling data.

The printer is warning up.
The printer is adjusting the color.

Summary of Contents for LP 3130















































































































Search results

Summary of Contents for LP 3130

Reviews:

Related manuals for LP 3130

Brands by name

Popular brands

Utax LP 3130, Instruction Handbook Manual

Search results

Summary of Contents for LP 3130

Reviews:

Related manuals for LP 3130

Brands by name

Popular brands