Utax cd 1116, Instruction Handbook Manual

Page: 28 / 161

Copy Functions
1-18 ADVANCED OPERATION GUIDE
Program Function
Up to eight combinations of copy modes and functions displayed on the
operation panel can be registered as a single program.
Registering a Program
1
Select the copy options to be registered (for example 5 copies, Sort ,
Margin ) and press [Program] .
2
Press
S
or
T
to select Register
program and press [Enter] .
3
Press
S
or
T
to select the
program number required (1 to 8)
and press
[Enter] .
The program is registered.
NOTE:
You can also select the program number using a numeric key.
Using a Program
1 Press [Program] .
2
Press
S
or
T
to select the
program number required and
press
[Enter] .
NOTE:
You can also select the program number using a numeric key.
3
Position the originals and press [Start] .
Copies are produced using the settings registered in the program.
Register program.
Program:
Program #7
Program #8
Program #3
Register program:
Program #1
Program #2
Program #3
Program:
Program #1
Program #2