36
Make IR
If you know the IR protocol and IR data value of the remote control
button, you can input the IR protocol data to the remote control button
directly and will be able to use.
1
Press
[Make IR]
on the “Edit Remote Control” screen.
2
Select the
“IR protocol”
you want to make, and press
[Next]
.
3
Press
[Next]
on the next screen, and then you will be directed to
“Device Home”.
4
Select and press a Device button on “Device Home” to Make IR its
Remote Control button. You will be directed to the selected device‟s
1
st
Remote Control page.
Note
1. To move between pages, and find a device button, use the
[
◀
,
▶
]
button.
2. To exit from the “Device Home” screen, press
[Exit]
.
5
Select and press Remote Control button you would like to Make IR.
You will be directed to „IR data input‟ screen.
Note
.
You can use the hard key for making IR also.
.
6
To Make IR, follow the instructions described below.
①
Select the data value from 16 digit button (from 0 to 9 and from A to F), and
then the data value is indicated in red text.
Note
. IR data can be input as byte unit, and composed with Address 1byte
and Command 1byte.
②
Press
[Input]
button to save the data in a result window.
③
If you want to cancel the input result, press
[Reset]
button and try again.
④
The
[Test]
option allows you to test the IR function before registration.
⑤
Press
[Next]
button, the IR data will be saved to the remote control button.
7
To continue Make IR, press
[Yes]
, or press
[No]
to finish on the
next screen.
☞