User Manual & Installation Guide
UTAH-100/X HD Series
3213-User10.doc
Date: 2009-10-07, Rev. 1.0
7
External Power Supply
The external Power Supply is an AC/DC Switch Mode desktop power supply module with compact
design. The power supply has a universal input voltage, with 3 pins IEC 320 connector. The output
voltage is 13.2 VDC and is short circuit proof and deliver up to 40W. One secondary cable with the
modular connector in the one end connects to the power supply and the other end with a 5.5/2.1mm jack
connects to the UTAH-100/XHDA frame. Utah Sandar recommends the Power Supply 9920 from
Mascot A/S, but other types of Power Supplies may be used with similar specifications.
Mains cord is
not included.
Mounting bracket is available.
UTAH-100 CONTROL SOFTWARE:
•
For Quick Start Guide see the attached document in the delivery.
•
UTAH-100 Control Software see the document file: UTAH-100-ControlSoftware10.pdf attached
in the user manual CD.
PINOUT
Power Connection
The UTAH-100/X16HD units have two 2.1mm DIN 12VDC connector with + at centre.
The power unit supplied with the UTAH-100/X16HD is a 13.2 VDC with a max rating of 3A (40W)
Port Pin Orientation
Ethernet Port
The Ethernet port is an 8-pin RJ-45 jack meeting the requirements of ISO 8877 for 10/100Base-T.
Ethernet Pin Assignment
Pin
Signal Name
Figure
RJ-45
1
TxD+ (Transmit Data)
2
TxD- (Transmit Data)
3
RxD+ (Receive Data)
4 Not
used
5 Not
used
6 RxD-
(Receive
Data)
7 Not
used
8 Not
used