User Manual & Installation Guide
UTAH-100/X AA Series
Document: 3212-user10
Date: 2009-10-26, Rev. 1.0
4
SAFETY & ENVIRONMENT
General
This product and related documentation must be reviewed for familiarization with safety markings and
instructions before operation. This product has been designed and tested in accordance with the
relevant international standards.
Safety Symbols
Indicates hazardous voltages.
Indicates earth (ground) terminal.
!
The
CAUTION
sign denotes a hazard. It calls attention to an operating procedure,
practice, or the like, which if not correctly performed or adhered to could result in
damage to or destruction of part or all of the product. Do not precede beyond a
CAUTION sign until the indicated conditions are fully understood and met.
STOP
The
WARNING
sign denotes a hazard. It calls attention to a procedure, practice, or the
like, which, if not performed or adhered to could result in personal injury. Do not proceed
beyond a WARNING sign until the indicated conditions are fully understood and met.
Safety Earth Ground
This is a Safety Class 1 product (a protective earth terminal (Ch) is provided).
An uninterrupted safety earth ground must be provided from the main power source to the product input
wiring terminals, power, cord, or supplied power cord set. Whenever it is likely that the protection has
been impaired, the product must be made inoperative and secured against any unintended operation.
Environment
WEEE
: All Utah Sandar products will comply with the EU Directive 2002/96/EC on
Waste from Electrical and Electronic Equipment aka WEEE directive. Please contact
your local Utah Sandar sales representative for information about returning these
products for safe disposal/recycling. Utah Sandar equipment that complies with the
directive will be marked with a WEEE-compliance emblem.
RoHS
: All Utah Sandar products will comply with the EU Directive 2002/95/EC on
Restriction of Hazardous Substances aka RoHS directive. Thereby not containing above
the limits specified in the said directive of any of the banned substances. Utah Sandar
equipment that complies with the directive will be marked with a RoHS-compliance
emblem.
Exempt: Spare/Expansion parts for older systems are exempt from the directive.
