USR IOT USR-DR504-E Software Manual Download Page 24

Page: 24 / 52

USR-DR504-E User Manual

www.usriot.com

Jinan USR IOT Technology Limited

Tech Support: h.usriot.com

2.3.6.

Indicator Status

There are ten indicators light on the DR504, PWR, WORK, NET, LINKA, LINKB, TX, RX, First-level signal strength,

second-level signal and third- level signal. The status represented by the indicator are as follows:

Figure 8 Indicator status

Indicator name

Indicator function

Status

POWER

Power indicator

Always on after power work normally

WORK

System operation indicator.

Flashing after system running

NET

Network status indicator

Always on after registering the network

LINKA

Socket A connection indicator

Always on after socket A is connected

LINKB

Socket B connection indicator

Always on after the socket B connected

Serial port send the data

Light when there is data from serial port

Serial port receive the data

Light when there is data received by the serial
port

First-level signal

Indicate the first level signal
strength

Always on when the signal strength reach the
first level

Second-level

Indicate the second level signal
strength

Always on when the signal strength reach the
second level

Third- level signal Indicate the third level signal

strength

Always on when the signal strength reach the
third level

Form 2.3.6-1 Indicators

2.3.7. Restore to the factory default settings

After power on, press the Reload button for 3~15S and release it to restore the device parameters to factory

default parameters.

2.3.8.

Firmware Upgrade

2.3.8.1. Upgrade by serial port

In order to reduce the complexity of firmware upgrade for users, USR-DR504-E has specially set up the firmware

upgrade with 232 ports. The steps are as follows:

(1) Set baud rate to 115200, no check bit, data bit 8, stop bit 1, open serial port, click firmware upgrade, and select

the firmware to be upgraded.

Summary of Contents for USR-DR504-E





















































Search results

Summary of Contents for USR-DR504-E

Reviews:

Related manuals for USR-DR504-E

Brands by name

Popular brands

USR IOT USR-DR504-E, Software Manual

Search results

Summary of Contents for USR-DR504-E

Reviews:

Related manuals for USR-DR504-E

Brands by name

Popular brands